Multipurpose MTR – Thermwood 3 Axis CNC Router

 

Complete  3-Axis CNC routing systems with single or dual in-line tables for nested base, composite or plastic sheet material.

Multipurpose MTR – Thermwood 3 Axis CNC Router

The MTR is a complete 3-Axis CNC routing systems with single or dual in-line tables for nested base, composite or plastic sheet material.

Features:

  • 12 HP HSD Spindle (3,000-24,000 RPM). Optional 18 HP Spindle
  • Fixed Single Steel High Flow Table with Moving Gantry (MTR 21, MTR 30, MTR 36 and MTR 60)
  • Dual, Fixed Steel High Flow In-Line Tables with Moving Gantry (MTR 30DT)
  • 10 Position Bar Style Automatic Tool Changer (MTR 21 Single Table)
  • 16 Position Bar Style Automatic Tool Changer (MTR 30, MTR 36 and MTR 60 Single Table)
  • 15 Position Bar Style Automatic Tool Changer (MTR 30 DT, Dual In-line Table)
  • At the Head Automatic Tool Changer (Optional)
  • Automatic Tool Length Measurement
  • Three-Dimensional Laser Compensated Axis Alignment
  • Control Nesting
  • Siemens Intelligent Servo Drives Throughout
  • QCore SuperControl
  • Machine Training and Installation

Available Table Sizes:

5’x10′ (1.52m x 3m), 5’x12′ ( 1.52m x 3.6m), 7’x12′ (2.1m x 3.6m), 7’x20′ (2.1m x 6m)

Category:

Standard Features

control nesting for 3 axis cnc router

Control Nesting

Integrated into the Thermwood control system to nest various parts into sheet stock, it also accepts layered DXF files.

Volumetric Laser Compensated Axis Alignment for complete accuracy on cnc machine

Volumetric Laser Compensated Axis Alignment

Using the most sophisticated calibration equipment results in being able to offer you the most accurate CNC machine. 

The ultimate in CNC router system control

QCore SuperControl

Designed by Thermwood to work seamlessly with its CNC machines, the Qcore Super Control system is feature rich to offer the most accurate manufacture of your part.

12 HP (9 kw) Spindle for 3 axis CNC router

12 HP (9 kw) Spindle

A direct driven spindle with a speed range up to 24,000 RPM. The high-frequency spindle is cooled with an electric fan for quieter running and contains ceramic bearings for longer life and for less maintenance.

15 piece automatic tool changer for 3 axis CNC router

15 Position Bar Style Automatic Tool Changer

Mounted between the two tables, this 15 piece automatic tool changer is quick to react when the program calls for it. Standard on MTR 30.

tool changer for 3 axis cnc router

10 Position Bar Style Automatic Tool Changer

Mounted behind the rear of the table, this automatic tool changer is quick to react when the program calls for it. Standard on MTR 21 Single Table.

Additional features

Automatic Lubrication

Provides positive pressure, air / oil lubrication to the linear track way bearings and the ball screws. This both prevents contamination to the bearing allowing the machine to work in dusty environments and takes away the need to manually lubricate the machine between shifts.

18 HP (13 kw) Spindle

Programmable from 3000 to 20,000 RPM the 18HP spindle accepts HSK F63 tool holders and Thermwood aggregates. 

At the Head Automatic Tool Changer

This option consists of tool holder arms and five tool holders, which mount in an arc around the front of the spindle and hold the tapered tool holders.

2nd Head Spindle

A second head can be added to allow simultaneous machining of two parts.

Drill Bank

The drill unit is a vertical boring head with nine vertical spindles. The spindles are on 32mm centers.

Pop-Up Pins

These are guides which are mounted to the table perimeter for locating sheets of material.

Automatic Tool Length Sensor

Automatically compensating for for the change in tool length, the sensor offers a highly accurate method of adjusting before profiling edges.

Vacuum Pump

A unique way of holding parts to the table, the high flow pump vacuums through the work surface to hold the part in place. 

Aggregate Tooling

Allows the operator to route or drill horizontally and saw, offering increased revenue potential with the added flexibility. While not in use, the aggregate tool body is stored in a tool holder located off the back of the table

Rotary Playback

The rotational playback axis is attached to the top of the machine table. it is capable of accepting stock that is 8 inches (200mm) in diameter and up to 56″ (1.4m) in length. The unit is designed primarily for reproducing furniture components.

DOWNLOAD OUR BROCHURE FOR MORE INFORMATION

Videos

googlef1faab982f5793b5.html