M90 – Thermwood 5 Axis CNC Router
High-speed trimming and pattern CNC routing, available in single or dual moving tables
M90 – Thermwood 5 Axis CNC Router
High-speed trimming and pattern CNC routing, available in single or dual moving aluminum tables.
Features:
- 12 HP 24,000 RPM Router with a 4 Position Automatic Tool Changing System (Standard)
- 21.5 HP 24,000 RPM Router with a 4 Position Bar Style Automatic Tool Changing System (Optional)
- 16 HP 24,000 RPM Router with a 4 Position Bar Style Automatic Tool Changing System (Optional)
- 1″ Thick Solid Aluminum Vacuum Table (Standard)
- 1/2″ Thick Multi-Function Vacuum Table (Optional)
- Extended Z Axis: 36″ vertical (Optional)
- Extended Z Axis: 48″ vertical (Optional)
- Extended Z Axis: 60″ vertical (Optional)
- Six Position Tool Bar Under Gantry (Optional)
- Four Position Automatic Tool Changer – On Right Side Gantry Leg (Standard)
- Ten Position Rotary Automatic Tool Changer (Optional)
- Twelve Position Tool Bar (mounted to back of table) (Optional)
- Automatic Tool Length Measurement (Optional)
- Automatic Tool Length Sensor (Optional)
- Automatic Lubrication System (Optional
- Gantry Lighting System (Optional)
- Accu-Lube Mist Coolant System (Optional)
- Machine Enclosure (Optional)
- Impact Resistant Five Axis Head (Standard)
- Continuous C Axis (Optional)
- Three-Dimensional Laser Compensated Axis Alignment
- Siemens Intelligent Servo Drives Throughout
- QCore SuperControl
- Machine Training and Installation
Available Table Sizes:
Single Table – 5’x’5, 5’x10′, 10’x5′
Dual Tables – 5’x5′, 5’x10′ and 5’x12′
Standard Features
12 HP 24,000 RPM Router with 4 Position Bar Style Automatic Tool Changing System
Volumetric Laser Compensated Axis Alignment
QCore SuperControl
4 Position Automatic Tool Changer
Mounted on the gantry leg this 4 position tool changer can accept tools with a maximum length of 11.5″ and a diameter of 2″.
Additional features
Automatic Lubrication
Provides positive pressure, air / oil lubrication to the linear track way bearings and the ball screws. This both prevents contamination to the bearing allowing the machine to work in dusty environments and takes away the need to manually lubricate the machine between shifts.
Ten Position Rotary Automatic Tool Changer
6 Position Bar Style Automatic Tool Changer
Mounted to the top surface of the CNC table the 6 piece automatic tool changer allows tools up to a size of 3.25″ in diameter..
Automatic Tool Length Sensor
This time saving device automatically senses the length of the tool and compensates for this before cutting again. This provides a highly accurate method of adjusting tools for profile edges.